IP•Express V.35
V.35 WAN Router or Ethernet Bridge
- Branch Offline Connections
- Shared Internet Access
- Education District Networking
- Multimegabyte File Transfers
- Ethernet to V.35 Conversion
SIZE
9" (L) x 7.3” (W) x 1.50” (H)
Overview
IP•Express V.35 is a Wide Area Network solution that bridges Ethernet Packets or routes the Internet Protocol through a High Speed V.35 WAN interface. The V.35 WAN port supports Point to Point and Frame Relay Wide Area Networking Protocols with 24/7 proven interoperability.
IP•Express V.35 are used extensively with Wide Area Networks for high performance branch office connectivity and Internet access. Internet Service Providers deploy the IP•Express V.35 as a customer premise solution. Corporations and Government agencies select the IP•Express V.35 for its ease of installation and reliability.
The IP•Express V.35 is a very reliable, high performance and cost effective IP WAN Router and Ethernet Bridge for interconnecting remote LANs and for shared high performance Internet Access. IP•Express V.35 is great for:
• Branch Office Connections • Shared Internet Access
• Education District Networking • Multimegabyte File Transfers
• Ethernet to RS530 Conversion
Network Security is provided with Full On Source, Destination Address; Port and Flag IP Packet filtering. Interconnectivity is able to be selectively controlled at the network, device and application layers.
Management of the IP•Express V.35 is accomplished with a Command Line Interface that is accessed through a Console or Telnet connection. Templates of the most common configuration provide for an Edit and Paste configuration. SNMP MIB I and II support is a standard feature.
Rack Mount Kit
The IPExpress products are easily installed in 19" and 23" racks with the Rack Mount Kit. Easy access to both front and rear sides facilitates technician maintenance procedures.
Applications
Two T1 Inverse Packet Multiplexer
IP•Express V.35 is a high performance, bandwidth scalable, IP WAN router. The V.35 port is able to interconnect to remote locations at 2 Mbps. Standards based WAN protocols, PPP, Multilink PPP, and Frame Relay, ensure interoperability.
MPEG IP Video Redundancy Switch
REDundant IP Video configuration automatically switches from the Primary to a Secondary Encoder's IP Video Stream for mission critical broadcasts and is available with the IP•Express V.35-IPM-RED. A one second absence of IP packets from the Primary Encoder results in the switch to the Secondary Encoder. The WAN bandwidth is reserved for a single feed.
MPEG IP Multicast Streaming Video
IP•Express V.35-IPM models deliver MPEG IP Streaming Video over Inverse Packet Multiplexed V.35s. The Inverse Packet Multiplexer provides the bandwidth necessary for the delivery of broadcast quality video feeds for a single MPEG Video. IP Multicast is a standard feature of the IP•Express V.35 and is utilized to distribute MPEG video simultaneously to multiple decoders.
Specifications
LAN Network Interface
- 10/100 BaseT Ethernet Port
- Auto-negotiate or ConfiguredSpeed/Duplex
LAN Network Protocols Supported
- IP, TCP, UDP, RIP, ICMP
- IP Multicast support
- IP Video Stream Redundancy (Optional)
WAN Network Interfaces
- One V.35 DTE or DTE
- 16 Megabit per second clocking rate
WAN Network Protocols Supported
- PPP (RFC 1548, RFC 1332, RFC 1334, PAP)
- Frame Relay (ANSI ANNEX D, LMI, RFC 1420)
V.35 Specifications
- DTE DB25 Female pinned RS530
- 8 Megabit per second clocking rate
TFTP Online Upgrade Capable
- Fully operational during upgrade
Network Security
- Full On Source, Destination Address; Port and Flag IP Packet filtering
- Network, Device and Application Layers.
Dimensions
- 9" (L) x 7.3" (W) x 1.50" (H)
- 4 E1 Wan Connectivity in 1/2 of a 1U 19" rack
Management
- Secure Socket Shell - SSH Diffie-Hellman Group1/14 key exchange and strong integrity checking via MAC SHA1/SHA1- 96 with Cipher AES-128 and 3DES and DSS and OpenSSH public key format
- Telnet support with Edit and Paste Templates
- Console Port for Out of Band Management
- SNMP support (MIB I, MIB II)
- Remote configuration, monitoring, & reset
Regulatory
- Safety -IEC60950
- EMC - CFR 47 Part 15 Sub Part B:2002 EN55022: 1994 + A1 & A2 EN55024, ICES-003 1997 CISPR 22 Level A
- CE
Power
- Locking Power Connector
- 12-24 VDC 1.0A
- Ships with Universal Adapter
- Optional -48V 0.25 Amp
- Hot Standby with 2nd Power Module
Routing Protocols Supported
- RIPv1, Static
Ordering Information
Back Panel AC
Adapter cable required for V.35
Console Port Connector · RJ 45 to DB 9 Female Adapter provided
V.35: Interface for WAN connectivity via PPP or Frame Relay
Chassis Slot Card: IP•Express V.35
Rack Mount & Power Supply Options:
Part No.
Description
076-1V35
IP•Express V.35, HS Base Model
Optional Features
Optional Features
IPM
Inverse Multiplexor Option, IPM 3 to 6 Mbps Interconnet over 2,3, or 4 Dedicated T1 WANs
RED
MPEG IP Video REDundancy Switch, Secondary Encoder Traffic passed on failure of Primary Encoder
CMP
ROHS compliant materials and processes, Restriction of Hazardous Substances no Pb
Power Supply Options
Power Supply Options
094-2418
90-220 VAC Universal International/Domestic Adapter
094-2418-R
DUAL REDUNDANT, 90-220 VAC Adapter
094-N48V
Internal Power Module, -48 VDC Screw Terminals
094-N48V-02
DUAL REDUNDANT, -48 VDC Screw Terminals
094-1500
WIREDC Option, +24 VDC Screw Terminals
094-WIREDC-R
DUAL REDUNDANT, +24VDC
Rack Mount Options
Rack Mount Option
095-1000
Rack Mount Kit - for single 7" products (Fits both 19" and 23" racks)
095-2000
2 unit 19" x 1RU Rack Mount Kit for 7" products
094-WIREDC-R
DUAL REDUNDANT, +24VDC
095-3000-RTANG
Right Angle Wall Mount Bracket Kit
