IP•Express GT1-DI
WAN Router with Four Integrated T1 DSU/CSUs
- MPEG Video Distribution -
- Branch Office Connectivity -
- Education District Networking -
SIZE
9" (L) x 7.3” (W) x 1.50” (H)
Overview
IP•Express GT1-DI is a high performance, bandwidth scalable, WAN router or bridge with 4 T1 ports that have flexible Drop and Insert capabilities. Point to Point and Frame Relay Wide Area Networking Protocols, with 24/7 proven interoperability, are fully supported on the T1 channels allocated to the internal WAN Router or Bridge.
The 4 T1 ports are able to independently connect T1 based Telecommunication Equipment and Ethernet LANs to 1 or 2 remote locations.
A WAN Router or Bridge, 1 to 3 T1 Drop and Insert Interfaces and a long haul T1 DSU/CSU are
integrated to create a complete T1 Data and Voice Multiplexor.
Applications
The IP•Express GT1 interconnects remote LANs and addresses the large market for connectivity in the multi-megabit bandwidth range such as high quality MPEG Video delivery.
The Integration of the T1 CSUs provides for a complete solution with a straight forward configuration.T1 Branch Office Connectivity
IP•Express GT1 utilizes 4 T1 Telco Circuits to optimally interconnect 4 Remote LANs with IP•Express DLT1s.
Specifications
LAN Network Interface
- 10/100 BaseT Ethernet Port
- Auto-negotiate or ConfiguredSpeed/Duplex
LAN Network Protocols Supported
- IP, TCP, UDP, RIP, ICMP
- IP Multicast support
- IP Video Stream Redundancy (Optional)
WAN Network Interfaces
- Four T1/FracT1 CSU/DSU ports
- Inverse Packet Multiplexing (Optional)
WAN Network Protocols Supported
- PPP (RFC 1548, RFC 1332, RFC 1334, PAP)
- Multilink PPP (RFC 1990)
- Frame Relay (ANSI ANNEX D, LMI, RFC 1420)
Routing Protocols Supported
- RIPv1, Static T1/Fractional T1 Specifications:
- Framing - ESF or D4
- Coding - B8ZS or AMI
- Supports DS0 assignments from 1 to 24 (64Kbps to 1.536Mbps)
T1 Diagnostic
- Loopback Test
- Network, Internal, Framer, Payload
- Bert Tests
- 2E07,2E11,2E15,QRS
- TFTP Online Upgrade Capable
- Fully operational during upgrade
Network Security
- Full On Source, Destination Address; Port and Flag IP Packet filtering
- Network, Device and Application Layers.
Dimensions
- 9" (L) x 7.3" (W) x 1.50" (H)
- 4 T1 Wan Connectivity in 1/2 of a 1U 19" rack
Management
- Telnet support with Edit and Paste Templates
- Console Port for Out of Band Management
- SNMP support (MIB I, MIB II)
- Remote configuration, monitoring, & reset
Regulatory
- Safety -IEC60950
- EMC - CFR 47 Part 15 Sub Part B:2002 EN55022: 1994 + A1 & A2 EN55024, ICES-003 1997 CISPR 22 Level A
- Telecom - Part68
- CE
Power
- Locking Power Connector
- 12-24 VDC 1.0A
- Ships with Universal Adapter
- Optional -48V 0.25 Amp
- Hot Standby with 2nd Power Module
Ordering Information
Chassis Slot Card: IP•Express GT1-DI
Rack Mount & Power Supply Options:
Part No.
Description
0DI-1544-0x*
IP•Express GT1-DI, *Note: x = specificed number of T1 ports to be enabled (1 to 4)
U77-1544-0x*
IP•Express GT1 T1-DI Port Upgrade, Enable Additional T1 Ports (up to 4)
Optional Features
Optional Features
CMP
ROHS compliant materials and processes, Restriction of Hazardous Substances no Pb
Power Supply Options
Power Supply Options
094-2418
90-220 VAC Universal International/Domestic Adapter
094-2418-R
DUAL REDUNDANT, 90-220 VAC Adapter
094-N48V
Internal Power Module, -48 VDC Screw Terminals
094-N48V-02
DUAL REDUNDANT, -48 VDC Screw Terminals
094-1500
WIREDC Option, +24 VDC Screw Terminals
094-WIREDC-R
DUAL REDUNDANT, +24VDC
Rack Mount Options
Rack Mount Option
095-1000
Rack Mount Kit - for single 7" products (Fits both 19" and 23" racks)
095-2000
2 unit 19" x 1RU Rack Mount Kit for 7" products
094-WIREDC-R
DUAL REDUNDANT, +24VDC
095-3000-RTANG
Right Angle Wall Mount Bracket Kit
